1 1/2 inch AODD pump with plastic body construction PP / PVDF BODY
1 1/2 inch AODD pump with metal body construction SS-316 / ALUMINIUM

1 1/2 Inch AODD Pump

An air-driven solution for industrial fluid transfer

The 1 1/2 inch Air Operated Double Diaphragm Pump is designed for industrial fluid-transfer applications where process connection, required flow and construction materials must match operating conditions.

Plastic and metal body configurations are available as listed options. The suitable construction and operating limits should be confirmed according to the fluid and application requirements.

Discuss Your Requirement → See Technical Data

Please confirm the current datasheet and model-specific specifications with Ambica Machine Tools before ordering.

NOMINAL MODEL 1 1/2 Inch
PUMP TYPE AODD
BODY OPTIONS Plastic / Metal
MAXIMUM FLOW 270 LPM
Model overview

Where the 1 1/2 Inch Configuration Fits

A process pump configuration to evaluate according to piping connections, transfer requirements and material compatibility.

The 1 1/2 inch AODD pump is part of the air-operated diaphragm pump range from Ambica Machine Tools. The pumping cycle is driven by compressed air, which operates the double-diaphragm mechanism to move liquid through the pump.

This model is intended for applications where a 1 1/2 inch connection arrangement is required. Confirm the exact connection standard and dimensions against the current product drawing before integrating the pump into a process line.

Listed construction choices for this product range include Polypropylene (PP), PVDF, Stainless Steel 316 (SS-316) and Aluminium. The availability of each material for this specific model should be confirmed with the supplier.

To help identify a suitable configuration, share the fluid name, concentration, operating temperature, required flow, suction and discharge conditions, and available compressed-air supply.

Technical reference

1 1/2 Inch AODD Pump Specifications

Technical specifications and performance details of the 1 1/2 Inch Air Operated Double Diaphragm Pump.

Product 1 1/2 Inch Air Operated Double Diaphragm Pump
Size 1 1/2" BSP (40 MM)
Maximum Flow Rate 270 LPM
Material of Construction PP, PVDF, SS-316, Aluminium
Inlet Port 38.10 MM (1 1/2" BSP)
Discharge Port 38.10 MM (1 1/2" BSP)
Air Inlet 1/2" BSP
Air Exhaust 12.70 MM (1/2" BSP)
Suction Lift - Dry 4.57 M (15 FT)
Suction Lift - Wet 7.62 M (25 FT)
Teflon - Dry 3.05 M (10 FT)
Teflon - Wet 6.09 M (20 FT)
Maximum Particle Size 4.76 MM (0.188")

Technical note: Confirm the current datasheet, operating conditions and model configuration with the manufacturer before procurement or installation.

Application guidance

Applications to Evaluate for the 1 1/2 Inch Pump

Confirm that the selected pump configuration meets the process requirements before use.

↗

Industrial Fluid Transfer

Evaluate the pump for liquid-transfer duties where the required flow and connection arrangement match the selected model.

⚙

Air-Driven Pumping Systems

Consider applications where compressed air is used to drive the pump. Confirm the available air supply and operating range.

◇

Material-Specific Applications

Review the listed plastic and metal body options against the chemical and temperature requirements of the fluid.

⇄

Process-Line Integration

Check the pump connections, pipework, installation arrangement and system resistance before integrating the unit.

◎

Intermittent Transfer Duties

Discuss start-stop frequency, operating conditions and compressed-air availability when evaluating the application.

✓

Equipment Integration

Assess connection standards, suction conditions, discharge pressure and material compatibility for the installation.

Important: These are application categories to evaluate, not a guarantee of suitability. Confirm the fluid, concentration, temperature, air supply and all wetted components before use.
Design points

Features to Review on This Model

Review these design and selection points when discussing the 1 1/2 inch AODD pump configuration.

01 / DRIVE

Compressed-Air Actuation

The pump operates through a compressed-air driven diaphragm mechanism.

02 / SIZE

One-and-a-Half-Inch Model

Confirm the actual port dimensions and connection standard against the product drawing.

03 / OUTPUT

270 LPM Maximum Flow

The listed maximum flow is 270 LPM. Actual performance depends on operating conditions and the pump configuration.

04 / M.O.C.

Construction Options

Ask about PP, PVDF, SS-316 and Aluminium availability for this specific model.

05 / AIR

Air Supply Requirements

Verify the 1/2 inch BSP air inlet, supply pressure and air consumption from the datasheet.

06 / SUCTION

Suction Conditions

Confirm the dry and wet suction-lift values applicable to the selected configuration.

07 / PARTICLES

Solids Handling

The listed maximum particle size is 4.76 mm. Confirm suitability for the fluid and solids involved.

08 / SELECTION

Duty-Based Configuration

Select the materials and operating conditions to suit the actual process duty.

Material selection

Available Construction Choices

Confirm the material availability for this model and the compatibility of all wetted parts with your process fluid.

Polypropylene (PP)

A listed thermoplastic construction option. Check chemical compatibility and temperature limits for the intended liquid.

PVDF

A listed fluoropolymer construction option. Confirm suitability against the exact chemical, concentration and operating temperature.

Stainless Steel 316

A listed metal construction option. Verify corrosion resistance and compatibility for the specific process fluid.

Aluminium

A listed metal body option. Confirm that the fluid and surrounding environment are suitable for aluminium construction.

Body material alone does not establish complete chemical compatibility. Diaphragms, seals, valve components and all other wetted parts must also be suitable for the fluid.
About the manufacturer

Discuss Your Pump Requirement with Ambica Machine Tools

Share your process details so the pump size, construction and operating requirements can be reviewed before you finalise your selection.

Product-Range Guidance

Discuss whether the 1 1/2 inch configuration matches your required flow and connection.

Material Review

Compare the available construction choices against your fluid and process conditions.

Specification Discussion

Review port sizes, air supply requirements, suction lift and operating limits.

Requirement-Based Enquiry

Provide the fluid details and duty requirements to discuss a suitable configuration.

Technical Clarification

Request the latest datasheet and installation information for this model.

Industrial Equipment Focus

Consider pump selection alongside the requirements of your process line and equipment.

Frequently asked questions

Questions About the 1 1/2 Inch AODD Pump

Answers to common questions about selection, materials and technical information.

What is a 1 1/2 inch AODD pump?

An AODD pump is an air-operated double diaphragm pump. The 1 1/2 inch model designation refers to the nominal size; confirm the exact connection dimensions and standard against the current datasheet.

What is the maximum flow rate of this model?

The listed maximum flow rate for the 1 1/2 inch model is 270 LPM. Actual flow depends on air supply, discharge pressure, fluid properties and operating conditions.

Which construction materials are available?

The product range lists Polypropylene (PP), PVDF, Stainless Steel 316 (SS-316) and Aluminium options. Confirm which options are available for this exact model.

What are the air inlet and process connection sizes?

The listed process connection is 1 1/2 inch BSP, with a 1/2 inch BSP air inlet. The listed air exhaust is 12.70 mm. Confirm all dimensions against the current datasheet.

Is the pump suitable for chemical transfer?

Suitability depends on the exact chemical, concentration, temperature and construction of all wetted parts, including diaphragms and seals. Confirm compatibility before use.

What information should I share for a recommendation?

Share the fluid name and concentration, temperature, required flow, suction and discharge conditions, available air supply, connection standard and any solids present.

Where can I request a quotation?

Use the enquiry link on this page to contact Ambica Machine Tools for pricing, current specifications and product availability.

Need Help Selecting the Right Pump Configuration?

Share your fluid and operating details to discuss the 1 1/2 inch AODD pump with Ambica Machine Tools.

Enquire About This Model →